Tent Family Camp for 3 people (light-olive)

The Tatonka Family Camp is suitable for a family of three to four. Two side entrances opposite each other lead into the two-meter-high apse. A third entrance is located at the front. The sleeping cabin of this 3-person tent is so generously proportioned that even four people will find enough space. Lockable windows in the side entrances and at the ends ensure sufficient light inside the tent.

Durable tunnel tent with three tent poles

The Tatonka Family Camp is made from long-lasting, tear-resistant, and durable materials. The UV-resistant, colorfast flysheet, made of four-layer PU-coated polyester, has an 8,000 mm water column and is permanently waterproof. The tent floor, made of PU-coated nylon, is also waterproof with a water column of 10,000 mm. The inner tent made of breathable nylon fabric ensures a pleasant climate inside the tent.

The Tatonka Family Camp is set up using three tent poles made of high-quality, shatterproof aluminum. The inner tent is then attached. With a little practice, however, the outer and inner tents can also be set up together in one go.

Features
- Tunnel tent with three poles and standing-height apse
- Windows in the entrances and end sides
- 3 entrances into the flysheet
- Apse entrance can be set up as a sun canopy (poles not included)
- 2 vents in the flysheet
- Waterproof sealed seams
- Waterproof construction of covers, vents, and attachment points
- Reflectors on the guy lines
- Practical packing aid for guy lines
- Reinforced corner points with webbing loops
- 2 insert pockets in the inner tent next to the entrance
- Clothesline in the inner tent
- Anodized Multipole aluminum tent poles
- Includes pack sacks for tent and poles
- Additional sleeping cabin available as an accessory (Art. 2447 Family Camp Extension)
- Includes 16 standard pegs and 8 guy lines

Details
Tent type: Family
Number of people: 3
Dimensions: approx. 500 x 260 x 200 cm
Packed size: approx. 75 x Ø30cm
Weight: approx. 7.3 kg
Weight / min: approx. 7.00 kg
Material 1: 68 den Polyester 210T PU
Water column flysheet: 8000
Material 2: 70 den Nylon Ripstop 190T WR
Floor material: 70 den Nylon Taffeta 190T PU
Water column floor: 10000
Seam type: sealed / taped
Pole type: Aluminum Multipole, 13/15 mm
Number of poles: 1 + 2
Number of loops: 14
Number of attachment points: 14
Number of guy lines: 8
Number of pegs: 16
Number of apses: 1
Number of flysheet entrances: 4
Number of mosquito nets in flysheet: no
Number of vents in flysheet: 2
Number of windows: 2 + 4
Number of flysheet pockets: 0
Number of ceiling pockets: 0
Number of inner tents: 1
Number of inner tent entrances: 1
Number of mosquito nets in inner tent: 1
Number of vents in inner tent: 1
Number of inner tent pockets: 1

68 den Polyester 210T PU
Composition 100% Polyester

The outer tent material is quadruple PU-coated on the inside (8,000 mm water column). Since the fabric does not absorb water, there is no stretching under wet conditions.

70 den Nylon Ripstop 190T WR
Composition 100% Polyamide

The water-repellent (W/R) fabric made of 70 den nylon is particularly breathable. The additional longitudinal and transverse stronger threads (Ripstop) give the fabric higher tear resistance. This makes this fabric ideal as inner tent material.

70 den Nylon Taffeta 190T PU
Composition 100% Polyamide

Tightly and finely woven, very lightweight tent floor material. Quadruple PU-coated, can withstand a 10,000 mm water column.

The images shown are for illustration purposes only.